Wednesday, August 5, 2015
How to buy a never erected or disassembl
What is the #1 tip, when it comes to buying a never-erected or disassembled steel building? The answer is The Closer The Better! Why? Shipping runs about $2.75 per mile, and you are going to use most of at least one flatbed truck. So, you ultimately will save cash by finding a structure that is close-by.
The other reason is because of your local building department design loads and codes. If the used building is close to your property, it is probable that the metal building engineering will be similar. It will make your permit process easier and again save on your engineering costs. We can assist in finding the right pre-engineered steel building, get it loaded and shipped to you, as well as provide you with the engineered documents that you need for permit.
If you haven't given your details to our customer service rep Tamara then contact her now at 503-946-5800 or TamaraBoyd@
Good Hunting,
Rick Safko
Prefabricated Steel Building Solutions Co.
Tuesday, March 6, 2012
A competent erector is key to the successful completion of any metal building or roof construction project. The thousands of buildings that perform satisfactorily attest to that fact.
However, a poorly trained or inexperienced erector--even with the best of intentions--can create a multitude of problems. Based on my analysis of hundreds of post-construction problems, the most common cause proved to be improper erection. This held true for everything from structural collapse to lack of water tightness.
Since the erector's role is so critical to the success or failure of a project, it is vital to find and hire someone who is knowledgeable and experienced in the specific type of metal building or roof erection at hand. Most metal roof manufacturers offer more than one product. Some erectors may have the training and experience to erect one, but not all, of a manufacturer's systems.
Attached is an article by Leon Dazy with useful guidelines for finding a capable erector with a qualified crew. If you have limited experience with metal building and roof systems, consider hiring a qualified metal building consultant to help you evaluate the installer. Some buildings are more complex than others, and a consultant can help verify that the installer's experience is a match to your project's level of complexity.
OK, so have we put a deal together that works for you yet?
Let Rick know about our progress for answers to your questions and response to your offer. Here's the contact info again at 503-946-5800 or RickSafko@usedcheapsteelbuildings.com
Let Rick know about our progress for answers to your questions and response to your offer. Here's the contact info again at 503-946-5800 or RickSafko@usedcheapsteelbuildings.com
Don't forget to keep checking out our inventory if you have not found what you want. UsedCheapSteelBuildings.com
Thanks,
Rick Safko
Prefabricated Steel Building Solutions Co.
Monday, December 12, 2011
When you attempt to estimate a steel building’s square foot cost, you must consider several factors.
The style of the building will impact the cost. You could choose the most popular choice - a rigid frame, or straight walled, steel building. This type of building can be finished with stucco, masonry or brick on the outside walls. It is a very strong and sturdy building choice. The larger the building, the less it costs per square foot. A large 80x100 building can be as low as $7 per square foot for the building shell, where a small 30x40 building averages about $10.
Separate from the cost of the structure itself, you need to add in all the accessories (including windows and doors). Delivery and labor costs add to the total as well. Estimate an additional 20% for accessories and delivery fees of 8-10% to get a fairly accurate total. Labor costs during instillation can add $5 - $6 per square feet.
The foundation and locations are two additional considerations. If you have an existing foundation and floor it will probably have to be re-engineered to meet code. If you require a new concrete slab you’ll need to add $6 to $8 per square foot to excavate, rock fill and pour.
If you’re looking for the most basic shade-and-shelter solution, with absolutely no frills—say a simple, 40’ x 60’ rectangular structure with an overhead door, walk door and a couple windows—in some regions of the U.S. you may be able to have a simple metal building supplied and erected for $20 - $25 per square foot, not including land cost. Beyond that, it just depends on the building departments requirements and your wants and needs.
Buying a “Used” structure expect to pay 40 – 60% off the $7 - $10 psf for the building but remember to add any engineering upgrades required for permit with loading and shipping costs to deliver.
The style of the building will impact the cost. You could choose the most popular choice - a rigid frame, or straight walled, steel building. This type of building can be finished with stucco, masonry or brick on the outside walls. It is a very strong and sturdy building choice. The larger the building, the less it costs per square foot. A large 80x100 building can be as low as $7 per square foot for the building shell, where a small 30x40 building averages about $10.
 |
| 80 foot plus steel bldg |
Separate from the cost of the structure itself, you need to add in all the accessories (including windows and doors). Delivery and labor costs add to the total as well. Estimate an additional 20% for accessories and delivery fees of 8-10% to get a fairly accurate total. Labor costs during instillation can add $5 - $6 per square feet.
The foundation and locations are two additional considerations. If you have an existing foundation and floor it will probably have to be re-engineered to meet code. If you require a new concrete slab you’ll need to add $6 to $8 per square foot to excavate, rock fill and pour.
 |
| 30' - 40' Steel Metal Bldg |
Buying a “Used” structure expect to pay 40 – 60% off the $7 - $10 psf for the building but remember to add any engineering upgrades required for permit with loading and shipping costs to deliver.
Subscribe to:
Posts (Atom)